We believe we have found probably the best value charger around. It is capable of charging a 6s lipo battery at 9amps and any 1-5s lipo at 10 amps. The average charger in this price rance is usually only 50watts which means 2.2 amps at 6s.
You even get a temperature sensor and a selection of charge leads for glow start , rx pack nd jst. Also some crocodile clips. At this price and these great specs we are sure you will be happy.
Built in to the charger are JST-XH balance ports for most types of batteries. We sell adaptors to suit most brands and if you get stuck just send us an email.
- Operating software
Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.
- High-power and high-performance circuit
B610A employs the circuit that has maximum output power of 200Watts. As a result, it can charge or discharge up to 18 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 10A. Furthermore, the cooling system is so efficient that can hold such a power without any trouble of running the circuit or the operating program.
- Individual voltage balancer for Lithium batteries inside
B610A has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.
- Accept various types of Lithium battery
B610A can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.
- Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.
- Data store/load
For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
- Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
- PC based analysis using USB communication
For technical expert, BC6-10 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.
- Back-light LCD screen
.jpg){kind=logo}
