Click to enlarge
|
Micro Aito kit from Donut Models. The model is cut from pre-printed Gediplac which ensures a very low airframe weight. Foam safe glue required for assembly.
Technical Specs
-Wingspan: 500mm
-AUW: 55-90g Depending on type of setup
Recomended equipment:Motor: 5.2 gram outrunnerESC: Rb Pro 6amp
Lipo: 250 or 300 2 cell
Servos: 3x 2.5 to 4gm servo RX: Lightweight 4 channel RX (35MHz or 2.4GHz)
A one cell setup is possible with Toki servos.
This model can be completed in a variaty of setups. You can choose the lightest and aim for 65-70gms which will be a mild aerobatic setup or a 85-90gm that will be a bit wild but a sacrifice in wing loading.
|
.jpg){kind=logo}
